Manufactured with special rubber compounds formulated to resist
the effect of steam ageing, Parker´s steam hoses conform to the latest
international standards. Special textile reinforcement provides high safety
margins with high pressures and temperatures. The cover is resistant to
abrasion, ageing and heat.
Suitable for delivery of hot water, non-aggressive hot
liquids and steam to a maximum temperature of +120 °C. To
connect boilers to air conditioning units and for hot water
cleaning systems. L = light duty.
Specifically designed for domestic appliances (washing
machines and dish-washers), for transport of hot water and
non-aggressive liquids.
Steam
Recommendations
Use only couplings with safety clamps. Follow the coupling manufacturer’s instructions for coupling procedures. Check
coupling tightness each time before use. Drain after use. When not in use, store the hose on a flat surface (shelves) and never
hang from a hook.
WARNING
Steam hoses gradually decrease in performance during service life. Consequently, they need to be regularly inspected by
trained personnel wearing adequate protective overalls, including eye protection.
WARNINGS OF DANGER
Cuts and gouges in the hose cover showing the textile reinforcement. Steam leaks.Permanent deformation of hose. Reduction
of steam flow. WHEN ONE OF THESE ABNORMALITIES OCCURS, THE HOSE SHOULD BE REMOVED FROM
SERVICE AND INSPECTED. If a failure occurs close to the couplings, the damaged hose can be cut, reconnected and used as
before.
Design for high pressure saturated steam (max 18 bar at
+210 °C). Suitable for loading saturated and superheated
steam in cleaning and sterilization applications,
petrochemical industry and general steam service
applications.
